Sigma EM-140 DG NA-ITTL Instruction Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 70
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
17
DESCRIPTION OF THE PARTS
Flash Unit
1.Left Flashtube 2.Right Flashtube 3. Auxiliary Light 4. Release Tab 5.MacroFlash Adapter
Controller Unit
6.LCD Panel 7.Battery Cover 8.Shoe Ring 9.Shoe 10.MODE Button 11.SEL SELECT Button
12. + Increment Button 13. - Decrement Button 14.LAMP Button 15.TEST Button
16.LIGHT Button 17.Ready Light 18.Power Switch
LENS USABILITY
Although this Flash is designed specifically for Macro lenses (MACRO 50mm F2.8 EX DG, MACRO
105mm F2.8 EX DG, etc.) it is also possible to use it with other lens types, however please pay attention to
the following points.
Front part or other parts of some lenses rotate while focusing, and also attaching the ring flash to such
lenses would affect focusing mechanism of your camera, possibly resulting in malfunction. Please use
Manual Focus only with such lenses.
Ø55mm, and Ø58mm filter MacroFlash Adapters are bundled with your flashgun. If you want to attach
your flashgun to a lens which has a different filter size then please purchase separately a MacroFlash
Adapter.Only Ø52mm, Ø62mm, Ø72mm, Ø77mm macroflash adapters are available.
Depending on the lensfocal length or the distance to subject or another reason, it is possible that your
image might be affected by vignetting. Please take some test shoots first to be sure that your setting is
not causing vignetting.
CAMERA MODELS AND FUNCTIONS
This flash can be used with cameras, which are given below.
D2 Series, D70, D1 Series, D100, F6, F5, F4 Series, F3 Series (*), F100, F90X/N90S Series,
F90/N90 Series, F80 Series, F70D/N70, U/F65/N65, F60D/N60, F50D/N50, F-801S/N8008S,
F-801/N8008, F601M, F-601/N6006, F501/N2020, F401X, F401S/N4004S, F-401/N4004, F-301,
N2000, FA, FE10, FE-2, FG, FM10, New FM2, Pronea 600i
(*) It is necessary to use adapter for connection.
This instruction book is used for the following lens types. (Please check your lens.)
With Built-in CPU Nikon Lenses
D Type Lenses, G Type Lenses, IX Nikor Lenses, Except D type AF
lens (does not include F3AF), Ai-P type lens
Without Built-in CPU Nikon Lenses
Ai-S, Ai, Series E lens
ABOUT THE BATTERY
This flash unit uses four “AA” type Alkaline dry cell batteries or Ni-Cad, Ni-MH, rechargeable batteries.
Manganese batteries can also be used but as they have a shorter life than Alkaline batteries, we do not
recommend using them. Please replace batteries if it takes more than 30seconds to light the Ready Lamp.
ۋ To assure proper electrical contact, clean the battery terminals before installing the batteries
ۋ NiCad batteries do not have standardized contacts. If you use NiCad batteries, please confirm that the
battery contacts touch the battery compartment properly.
ۋ To prevent battery explosion, leakage or overheating, use four new AA batteries of the same type and
brand. Do not mix the type or new and used batteries.
ۋ Do not disassemble or short-circuit batteries, or expose them fire or water; they may explode. Also, do
not recharge the batteries other than Ni-Cd rechargeable batteries.
ۋ When the flash will not be used for an extended period of time, remove the batteries from the flash, to
avoid the possibility of damage from leakage.
ۋ
Battery performance decreases at low temperatures. Keep batteries insulated when using the flash in cold weather.
ۋ As with any flash, it is recommended you carry spare batteries when on a long trip, or when
photographing outdoors in cold weather.
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 69 70

Comments to this Manuals

No comments