Sigma SD1 User Manual download pdf (Page 28)

SETTING THE TIME AND DATE

The SD1 camera records the date and time when each image is captured

and stores this information with the image. To ensure that the correct

information is recorded with each image, set the camera’s internal clock to

the correct date and time before using the camera for the first time or after

extended periods of disuse.

Make sure the camera is turned on.

Press the button on the back of the

camera to display the Camera Set-up Menu.

(See P.28)

Select [ Camera Settings (3)] by rotating

the S-dial (

Use the buttons or rotate the A-dial ( )

to select [Date/Time].

Press the or button to open the

date/time set-up page.

Use the buttons to select a setting and

use the

buttons to cycle through the

setting options.

Once all changes have been made, press

to save the settings and return to the

main menu.

Press

at any time to close the date/time

set-up

page

without

saving

any

the

changes.

TIP

• The date can be displayed in one of three formats: M/D/Y (month/day/year),

D/M/Y (day/month/year), or Y/M/D (year/month/day). Select the desired format

from “Date Format”.

• The camera’s internal clock is powered by a capacitor that receives its charge

from the camera’s battery. If the camera is left without a battery for an

extended period of time, such as after prolonged storage, the internal clock will

need to be reset.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 128 129

No comments

Sigma SD1 User Manual Page 28