Sigma SD9 User Manual download pdf (Page 57)

AUTO BRACKETING

This function of the camera lets you take a sequence of pictures of the same

subject at three different exposure levels; Appropriate Exposure, Under

Exposure and Over Exposure. If it is difficult to determine the proper exposure,

please use this function.

Set the “D”-dial to position.

Turn the “C”-dial to set the bracketing amount. (It

can be set in 0.5 EV step increments up to ±3

EV).

Set the “D”-dial to drive area (P. 1 4 ).

䕋

The camera will take three pictures in the following sequence; Appropriate

exposure, under exposure and over exposure.

For example: If you set the bracketing amount to 2.0, the indicator in the

viewfinder will show as follow.

mode

First Frame

0.0

* Measured Value

Second Frame

2.0

-2.0 EV deviation from Measured Value

Third Frame

2.0

+2.0 EV deviation from Measured Value

(* Measured value is the difference between the correct exposure value of the

camera and your setting value).

■

The exposure bracketing can be used with 4 different modes.

Mode ; Both shutter speed and aperture value will be changed.

Mode ; Only shutter speed will be changed.

Mode ; Only aperture value will be changed.

Mode ; Only shutter speed will be changed.

WARNING !!

· Once you set the auto bracketing mode, the camera will continuously hold that

auto bracketing mode until you set the bracketing amount to “0.0”.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 115 116

No comments

Sigma SD9 User Manual Page 57